Control Panel And Keypad - Sanyo MCO-19AIC(UV) Instruction Manual

Control panel and keypad

1
3
2
5
10
6
1. LCD panel
2. Upper limit regulator:
This regulator is used to set the upper
temperature limit.
3. OVERHEAT indicator:
This indicator lights when the chamber
temperature reaches the upper limit.
4. MENU Key:
Press this key to access the menu.
5. Contrast knob:
Turn this knob to adjust the contrast of the
LCD.
6. BUZZER Key:
Press this key to silence the buzzer.
Note: It is not possible to silence the
buzzer for an upper limit temperature
alarm.
The following optional components must be installed to perform decontamination.
UV Lamp Add-on Kit (MCO-19UVS) (This is provided as standard equipment for the MCO-19AIC(UV).)
H O Decontamination Kit (MCO-HL)
2 2
H O Generator (MCO-HP)
2 2
7. CE Key:
Press this key to clear the entered value
when entering a setting.
8. Cursor Keys (Up, Down, Left, and Right):
Use these keys to move the cursor on the
LCD panel.
9. ENTER Key:
Press this key to select a menu command.
When entering a setting, pressing this key to
move to the next parameter.
10. Numeric Keys
11. H O Key:
2 2
Press this key to start H
Refer to page 40 for details.
101
11
4
8
9
7
O decontamination.
2 2
10