Siemens DMS8000 MP4 Series Installation And Configuration Manual page 6

About this document
1
6
Building Technologies
Fire Safety & Security Products
Conditions that you must complete or must be
met before beginning a procedure are
designated with a ⊳.
Results, after completing a step or at the end
of the entire procedure, are designated with a
⇨.
Bold font in a procedure indicates something
you should select or type.
Menu paths are indicated in bold.
Error and system messages are displayed in
Courier New font.
Italics
are used to emphasize a term.
Caution
Warning
Cross references to other information in
printed material are indicated with an arrow
and the page number, enclosed in brackets:
[→92]
Modification index
Note: For versions more than four years old, please visit the Siemens Asset Portal.
Version Date
A6V10067792_a_en 06.2009
⊳ The report you want to print is open.
1. Click the Print icon
⇨ The Print dialog box appears.
2. Select the printer and click Print.
⇨ The print confirmation appears.
Type F for Field panels.
Click OK to save changes and close the dialog
box.
Select File > Text, Copy > Group, which
means from the File menu, then select Text,
Copy and finally Group.
The message Definition successfully
renamed displays in the status bar.
The Open Processor continuously executes a
user-defined set of instructions called the
control program
.
This symbol signifies a Note. Notes provide
additional information or helpful hints.
This is a Caution message and indicates that
minor or moderate injury or property damage
may occur if a procedure is not followed.
This is a Warning message and indicates that
a serious injury or a severe equipment and
property damage may occur if a procedure is
not followed.
For more information on creating flowcharts,
see Flowcharts [→92].
Notes
DMS8000 4.20.
.
A6V10067796_a_en
30.06.2013