Toshiba MMD-AP0481HF2UL Service Manual page 103

8
Remove parts to be replaced from the fan motor assembly.
Loosen the setscrews.
When replacing the fan motor, set it so
that the model name label directs upward.
Replace the fan motor with a new one.
Loosen M4 screws (2 positions) of the tightening band, Loosen M4 screws (2 positions) of the tightening band, Loosen M4 scre ws (2 positions) of the tightening band,
remove the tightening band and the fixing br remo remove the tightening band and the fixing bracket and e the tightening band and the fixing brac
then replace the f then replace the fan motor then replace the fan motor. an motor.
After replacement, assemble the fan in reverse procedure so that the assembly becomes the same status before replacement.
Be sure there is no looseness of screws in assembling time.
Check that the air blows off and the fan does not hit with the fan case, and also check there is no abnormal noise.
Take off M4 screws (4 positions) from the bell mouth.
Motor base Motor base Motor base
acket and et and
– 103 –
Remove the fan
Fixing bracket Fixing brac Fixing br acket et
Tightening band Tightening band Tightening band
(Left) two, (Right) two (Left) two, (Right) tw (Left) tw , (Right) two o