Table of Contents
Advertisement
Approvals
FDA and IEC marking
The following devices meet the FDA and IEC requirements listed below:
Device
PE408
PE408PoE
PE400-8SFP
* For modular devices, you can find the marking on the plug-in transceiver used and in the relevant
operating instructions.
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Mechanical stability (in operation)
Device
PE408
PE408PoE
PE400-8SFP
* Note: When installing on an S7-300 or S7-1500 standard rail
Installation guidelines
The devices meet the requirements if you adhere to the installation and safety instructions
contained in this documentation and in the following documentation when installing and
operating the devices.
● "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual
(https://support.industry.siemens.com/cs/ww/en/view/27069465)
● "Industrial Ethernet / PROFINET - Passive Network Components" System Manual
(https://support.industry.siemens.com/cs/ww/en/view/84922825)
● "EMC Installation Guidelines" configuration manual
(https://support.industry.siemens.com/cs/ww/en/view/60612658)
62
CAUTION
IEC 60068-2-6 vibration *
5 - 9 Hz: 3.5 mm
9 - 150 Hz: 1 g
1 octave/min, 20 sweeps
●
●
●
CLASS 1 LASER Product
IEC 60068-2-6 vibration
10 - 58 Hz: 0.075 mm
85 - 150 Hz: 1 g
1 octave/min, 20 sweeps
●
●
●
Operating Instructions, 09/2018, C79000-G8976-C332-08
-
-
(*)
IEC 60068-2-27 shock
15 g, 11 ms duration
6 shocks per axis
●
●
●
Extender for SCALANCE XM-400
Advertisement
Table of Contents
