Fujitsu 8FX MB2146-510-01-E Setup Manual page 13

3.2 Function List
The EV-board consists of a board and a sample firmware. The board provides a useful platform for
using the MCU and its peripherals. It is a useful development platform together with a BGMA and
a S
OFTUNE
. It features the following functions,
• Clock and sub-clock
• USB 5V power IF, external 5V power IF and the battery
• Reset circuit and reset key
• Provide IDC10 debug interface
• LEDs for general use, LED1 indicates DBG pin work status
• Provide one buzzer to demonstrate timer output
• 2 keys for general use
• Potentiometer and temperature sensor
• RS-232 level converter and DB9 interface (MAX232)
• LIN circuit reserved
• SIO 4 pins reserved
• All MCU ports are easy accessible through test pins
• Optional Starter kit to support each available MCU packages
9