Error Codes - Panasonic NP-6R2MUQNZ Operating And Installation Instructions

Error Codes

If a malfunction occurs, the Dishwasher will display error codes as below:
Display
Defi nition
Error Code
Long water inlet
time
Heating Abnormal Failure of heater
Water overfl ow
Failure of varistor Open circuit of varistor
Failure of varistor Short circuit of varistor
■
Note:
The above are the judgment and inspection of common failures.
To avoid danger to user and damage to the Dishwasher, repairs should only be
performed by a suitably qualifi ed serviceman.
If overfl ow occurs, turn OFF the main water supply before contacting a
Panasonic Authorised Service Centre.
If there is water overfl ow or small leaks, the water should be drained before
restarting the Dishwasher.
Possible Causes
Faucets not turned ON
suffi ciently, water intake
is restricted or water
pressure is too low
Some Dishwasher
components are leaking
WARNING
Solution
Open the faucet / water
supply or increase the water
pressure of water supply.
Contact a Panasonic
Authorised Service Centre
for assistance.
Contact a Panasonic
Authorised Service Centre
for assistance.
Contact a Panasonic
Authorised Service Centre
for assistance.
Contact a Panasonic
Authorised Service Centre
for assistance.
29