Philips CoralCare Software Manual page 10

• When you finished the setup of the schedule and saved it to the controller, you can disconnect the USB cable
from the computer.
• Connect the USB cable to the USB power supply.
3
1
2
0
• Insert the power supply into the plug (the controller will automatically be enabled and operational).
Battery Backup
The controller holds a battery backup that will save the data and the time on the controller.
The 24-hour schedule data (time, color point and intensity) will be saved in the internal memory and will nev-
er be lost. The actual time will continue to be correct up to two days after disconnection of the power from the
USB.
After two days, the time should be re-programmed via the PC application.
The internal clock of the device has a maximum deviation of 15 minutes a year.
We therefore recommend you re-program the time of the controller on a yearly basis.
Disconnecting controller
If there is no communication between the controller and the fixture (no power on controller or communication
cable disconnected from fixture), the fixture will go into a default state, with 10% light output.
10/12