Philips CoralCare Software Manual page 4

• After connecting, the software will automatically download the settings from the controller and synchronize
them with the application. You can always reload the settings from the controller by clicking "Load from con-
troller" in the "Common" tab of the "Basic scheduler" overview.
• By default the controller is programmed to output 5% light intensity for both channels (programmed in Cus-
tom1 and Custom2). If you want to use a 3rd party aquarium computer to control the CoralCare fixtures you
need to click "0-10V Mode" and press "Save to controller". All other schedule options become unavailable in
this mode.
• When the application is started and the controller connected, it displays the active schedule (also mentioned
in the bottom bar). You are now able to choose one of the predefined schedules (Shallow Reef, Natural Reef,
Deep Reef or Overcast Reef) or define a new one.
4/12