2
Scenario II : Mounting the NE05E on a Wall
a b
Install the multi-functional accessory
Mark the installation position for the
multi-functional accessory on the wall
Install the diagonal expansion bolt in pairs
c
Install the NE05E
1. Fix the mounting bracket on the back of the device on the multi-functional accessory from the top down.
2. Fasten the screw.
Use level to
mark dots
horizontally.
Nut
Flat washer
Expansion
tube
Bolt
11
Drill holes in the marked diagonal position
Remove the nut and flat washer, and install the
multi-functional accessory
M6
3±0.2 N· M
Ø8 drill bit