Input To The Inverter From The Network - Mitsubishi Electric 800 Series Instruction Manual

5.2

Input to the inverter from the network

Main items which can be commanded from the network to the inverter and their descriptions are explained below.
Item
Frequency setting
Operation mode write
Run command
Inverter reset
Parameter write
Parameter clear
Input terminal function
NOTE
• Refer to the FR-E800 Instruction Manual (Function) for functions controllable from the network in each operation mode.
36
FUNCTIONS
Description
Set the running frequency of the inverter.
Set the operation mode of the inverter.
Set the control input command such as forward operation signal
(STF) and reverse rotation signal (STR).
Reset the inverter.
Set parameters of the inverter.
Return parameters to the initial values.
Use the function of the inverter input terminal.
Refer to page
PPO type PPO type non-
support support
specifications specifications
47 73
53 72
47 72
53 71
45, 59 66, 74
52 71
47 72