Yamaha Clavinova CLP-230 Owner's Manual page 22

Selecting & Playing Voices
Procedure
Pressing the
[REVERB]
The indicators light in sequence each time the
produced when all indicators are off.
Adjusting Reverb Depth
Adjust the reverb depth for the selected voice by using the
while holding the
depth setting appears on the LED display while the
[EFFECT]
The button allows you to select an effect to give your sound greater depth and
[EFFECT]
animation.
OFF: When no effect is selected, no EFFECT indicator is lit.
CHORUS: A shimmering, broadening effect
PHASER:
Adds a sweeping effect to the sound.
TREMOLO: Tremolo effect
ROTARY SP: Adds the vibrato effect of a rotary speaker.
Procedure
To select an effect type, press the
sponding to the desired type lights (the indicators light in sequence each time you press
the [EFFECT] button). No effect is produced when all indicators are off.
Adjusting Effect Depth
You can adjust the effect depth for the selected voice by using the
buttons while holding the
The depth range is from 0 through 20. The current depth setting appears on the LED
display while the
[DDE] (CLP-240)
The DDE (Dynamic Damper Effect) lets you hear a simulation of the sustain sound of
the damper pedal on a grand piano, as you press the damper pedal and play the key-
board. This effect is applied to the entire sound of the instrument.
Procedure
Pressing the
[DDE]
Adjusting DDE Depth
You can adjust the DDE depth by using the
the button.
[DDE]
The depth range is from 0 through 20. The current depth setting appears on the LED
display while the
22
CLP-240/230 Owner's Manual
button repeatedly toggles the reverb on and off.
button. The depth range is from 0 through 20. The current
[REVERB]
button a few times until the indicator corre-
[EFFECT]
button.
[EFFECT]
[EFFECT] button is held.
button repeatedly toggles the DDE on and off.
[–/NO]
button is held.
[DDE]
button is pressed. No effect is
[REVERB]
[–/NO] [+/YES] buttons
button is held.
[REVERB]
and
[–/NO]
and buttons while holding
[+/YES]
NOTE
Releasing the [REVERB] button
changes the reverb type.
If you are changing the reverb
depth by holding the [REVERB]
button, pressing the [REVERB]
button will not change the reverb
type.
NOTE
Depth 0: no effect
Depth 20: maximum reverb depth
NOTE
Default depth settings are differ-
ent for each voice.
NOTE
The default effect type (including
OFF) and depth settings are dif-
ferent for each voice.
NOTE
Releasing the [EFFECT] button
changes the effect type.
If you are changing the depth set-
tings by holding the [EFFECT]
[+/YES]
button, pressing the [EFFECT]
button will not change the effect
type.
NOTE
Depth 0: no effect
Depth 20: maximum effect depth
NOTE
Default depth settings are differ-
ent for each voice.
NOTE
Normal setting = ON
NOTE
Depth 0: no effect
Depth 20: maximum DDE depth