Recording To Right/Left; Settings - Yamaha Clavinova CLP-230 Owner's Manual

Recording Your Performance

Recording to RIGHT/LEFT

This lets you record the right and left parts separately. Since you can record the left part while play-
ing back the right, this is useful for recording both parts of a duet.
Procedure
1.
Make all the initial settings.
Same as step 1 in "Recording a performance quickly" on page 29.
2.
Select a song to record.
Press the
[SONG SELECT]
[–/NO][+/YES]
CAUTION
To avoid erasing previously recorded song(s):
If the song contains data, the part indicator lights up green when you select a song.
Note that recording new data on this part will erase the existing data.
3.
Engage Record Ready mode.
Press the
[REC]
Ready mode. Recording does not actually start yet.
The amount of memory available for recording will be shown on the LED dis-
play in approximate kilobytes. The
the current METRONOME tempo setting.
Record Ready mode can be disengaged before recording by pressing the
button again.
4.
Start and stop recording.
Same as step 3-5 in "Recording a performance quickly" on page 30.
32
CLP-240/230 Owner's Manual
button to light "USER" indicator on, then press the
buttons to select a song for recording.
button and press the
[RIGHT]/[LEFT]
SONG [PLAY/PAUSE]
button to engage Record
indicator will flash at
[REC]
NOTE
Part button indications
Off: Contains no data
On (green): Contains data
On (red): Part is enabled for
recording
NOTE
The amount of memory avail-
able for recording:
This value in kilobytes (a unit
used of measurement for data)
indicates how much space
remains available for recording on
the Clavinova. You can record up
to a maximum of about 11,000
notes on the CLP-240/230
depending on pedal usage and
other factors.
NOTE
If the metronome was on when
you started recording, you'll be
able to keep time with the metro-
nome while recording, but the
metronome sound will not be
recorded.
NOTE
If you want to change the tempo,
time signature, reverb type, or
effect type when rerecording a
part or when recording to another
part, do so after entering Record
Ready mode.
NOTE
If you don't want to hear the previ-
ously recorded part while you
record (for example, when you
want to record a song different
from what you recorded on the
previous part), press the play-
back part button before pressing
the [REC] button so that its indi-
cator is turned off.
NOTE
For more information on record-
ing, see page 33.