Toro T4240 Installation Instructions Manual page 6

1. Screw (10 x 35 mm)
2. Washer (10 mm)
3. Bolt (12 x 100 mm)
4. Bracket
5. Flange bushing
6. Light arm
7. Washer (12 mm)
8. Locknut (12 mm)
Checking the Operation of
the Lights
1. With the ignition on, rock the indicator switch left to
operate the front and rear left orange indicator lights.
The indicator warning light on the switch will also flash
(Figure 5 and Figure
2. With the ignition on, rock the indicator switch right to
operate the front and rear right orange indicator lights.
The indicator warning light on the switch will also flash.
3. With the ignition off or on, rock the light switch
backward to switch on the 2 rear red position lights,
6).
Figure 7
9. Brace
10. Locknut (10 mm)
11. Heavy washer (10 mm)
12. Spring
13. Nut (10 mm)
14. Lock nut (6 mm)
15. Washer (6 mm)
16. Screw (6 x 25 mm)
the 2 front white position lights and number plate light.
The warning light on the switch will also light up.
4. With the ignition and light switch on, rock the headlight
switch forward to dipped headlights.
5. Rock the headlight switch backward for main-beam
headlights. The main-beam warning light on the switch
will also light up.
6. With the ignition off or on, rock the hazard switch
backward to operate and flash all 4 orange indicator
lights simultaneously. The hazard warning lights on
the switch will also flash.
6
g206691