Bosch BSA 43 Series Original Instructions Manual page 62

en 62 | BSA 43xx | Automatic mode
Step
5. Measure braking forces:
R
Slowly and steadily depress brake pedal until
maximum braking force (slip) is attained.
R
Release brake pedal again.
i
Shut-off criteria:
$
Wheel lock-up (slip monitoring).
$
Vehicle out of position (slip rollers no longer
pressed).
$
Maximum braking force (slip) not attained on
braking and braking action remains at rolling
resistance level for more than six seconds.
6. Wait until set of rollers starts up again automatically.
Then drive vehicle off set of rollers.
|
1 691 606 210 2015-07-29
Result / Display
 The current values are displayed on the screen:
$
Braking force (F)
$
Pedal force (PD)
$
Braking force difference (∆F)
$
Deceleration (Z)
 Peak value display (approx. 5 seconds).
"
Braking force measurement is over.
Robert Bosch GmbH