Functionality; Parts Identification - GE Druck TRX-II User Manual

FUNCTIONALITY

Parts Identification (

1. POWER switch
Switch the calibrator "ON" and "OFF".
2. EXT. POWER MEASURE
Connector for external power source.
Only suitable for optional line adaptor/charger #13603.
3.* Battery compartment cover
Release screws to get access to batteries.
4.* Battery selector switch
To select Alkaline or Rechargeable batteries.
Switch position must comply with the installed battery type.
5.* Spare fuse
For replacement of a blown fuse.
6.* Fuse mA, Fuse holder
Protects the milliamps measurement circuit.
7. Fuse ohms, Fuse holder
Protects the ohms/RTD measurement circuit.
8. Source terminals for 4 mm plugs
Suitable for standard test leads.
9. Source terminals for wire leads and 4 mm plugs
Suitable for compensation wire leads and standard test leads.
10. Measure terminals for 4 mm plugs
Suitable for standard supplied test leads.
11. Measure terminals for wire leads and 4 mm plugs
Suitable for compensation wire leads and standard test leads.
12. RS232 Connector
To interface directly with Personal Computers.
[Use is optional with compatible software]
13.*Memory card slot *
(PCMCIA)
To interface indirectly with Personal Computers.
[Use is optional with compatible software]
14. Auxiliary Connectors
For use with pressure sensors.
[Do not make any other connections to these terminals]
15. Key-pad numeric
Contains numeric and operating keys.
16. Display
17. Key-pad documenting
Contains keys dedicated for data storage.
* Not Applicable for Model TRX-II IS
[contact your local agent for a list of compatible software]
EN-2
)
IMPORTANT:
K319 Issue 2