Note: If you lose or forget the password that had been defined in the SonicWALL
Configuration window and ViewPoint cannot authenticate to your SonicWALL, you will
need to uninstall and reinstall the ViewPoint software, and then define the correct
SonicWALL administrator password.
Configuring Syslog Settings
The Syslog Configuration window allows you to change the UDP port number that
ViewPoint syslog server listens on, to configure ViewPoint to forward syslog data to
other servers, and to limit the database size.
1. From the ViewPoint Web Interface, expand the Configure option on the left side
of the browser window and then click Syslog.
2. To change the UDP port number that the ViewPoint syslog server listens on, enter
the new port number in the Port Number field.
Note: SonicWALL Internet security appliances write syslog traffic on port number 514.
3. To forward syslog data to a backup server, enter the IP address of the secondary
server in the IP Address field.
Page 172 Configuring SonicWALL Settings for Viewpoint