Dell SonicWALL GX250 Manual page 18

• Receive (RX)
The RX light is lit when data is received over the network connection.
• Link
The Link LED indicates that the interface is connected to a valid link partner and is
receiving link pulses.
The 1000Base-T network interface has the following LEDs:
• Link
The Link light is green when a network connection is made to another Ethernet
device (usually a hub) on the port.
• Activity
The Activity LED blinks, indicating Activity, when the SonicWALL transmits or
receives a frame.
• Network Speed
The Network Speed light remains off if there is no connection or if a 10Mbps
connection is made. If a 100 Mbps connection is made, the LED is green. If a 1000
Mbps connection is obtained, the LED is yellow.
Reset Switch
Resets the SonicWALL GX250 or the SonicWALL GX650 to its factory clean state. This
may be required if you forget the administrator password, or the SonicWALL firmware
has become corrupt. Please go to Appendix C for instructions on erasing the SonicWALL
firmware.
Page 18 HARDWARE DESCRIPTION