Mitsubishi Electric GOT1000 Series User Manual page 4

[DESIGN PRECAUTIONS]
 Do not install the communication cables together with the main circuit or
power lines, or bring them close to each other. The distance of 100mm
(3.9inch) or more should be ensured. Failure to do so may cause
malfunctions due to noise.
[INSTALLATION PRECAUTIONS]
 Be sure to shut off all phases of the external power supply used by the system
before mounting or removing this unit to/from the GOT.
Not doing so can cause a unit failure or malfunction.
 Use this unit in the environment given in the general specifications of the
GT15 User's Manual.
Not doing so can cause an electric shock, fire, malfunction or product damage
or deterioration.
 When installing this unit to the GOT, fit it to the connection interface of the
GOT and tighten the mounting screws in the specified torque range.
Undertightening can cause a drop, failure or malfunction.
Overtightening can cause a drop, failure or malfunction due to screw or unit
damage.
 Do not directory touch the conductive part or electronic components of the
unit.
This may cause the unit to fail or malfunction.
CAUTION
WARNING
CAUTION
A-3