SUN2000-(3KTL-10KTL)
User Manual
Figure 5-12 Correct wiring terminals
Procedure
Step 1 Connect the DC input power cable.
Before inserting the positive and negative connectors into the positive and negative DC input
terminals of the SUN2000, check that the DC SWITCH is OFF.
Use the Amphenol Helios H4 PV connectors supplied with the SUN2000. If the PV
connectors are lost or damaged, purchase the connectors of the same model. The device
damage caused by incompatible PV connectors is not covered under any warranty.
Issue 02 (2019-04-30)
Copyright © Huawei Technologies Co., Ltd.
Page 45 of 81