B Starting Built-In Pid Repair - Huawei SUN2000 Series User Manual

Prerequisites
Log in to the app as an installer. The initial password is 00000a.
Procedure
Step 1 Start built-in PID repair.
Figure B-1 Starting built-in PID repair
----End
Issue 02 (2019-04-30)
B
Starting Built-in PID Repair
 Set PID running mode to Repair (The default value is Disable).
 Set PID nighttime off-grid repair to
running mode is set to Repair).
Copyright © Huawei Technologies Co., Ltd.
SUN2000-(3KTL-10KTL)
(this parameter appears only when Built-in PID
User Manual
Page 77 of 81