Ironing With Steam Blast; Pausing Operation Of The Steam Iron; After Use; Drip-Stop Function - Silvercrest SDB 2400 F4 Operating Instructions Manual

Ironing with steam blast

■ The steam blast function is especially suitable for smoothing difficult-to-reach
parts of a garment.
NOTE
► The temperature control
Otherwise no steam will be produced.
1) Raise the steam iron slightly.
2) For a steam blast, press the steam blast button
steam blast function to smooth hanging textiles.
3)

Pausing operation of the steam iron

WARNING! RISK OF FIRE!
► Never leave a hot steam iron unattended if it is switched on or connected
to the mains power supply.
1) Move the temperature control
2) Stand the steam iron only on the base

After use

■ Remove the plug from the mains power socket.
■ Empty the water tank and clean the sole of the iron
■ Place the cooled-down steam iron on the base

Drip-stop function

With conventional steam irons, water can drip from the sole of the iron
temperatures. This iron however, possesses a new feature, the DRIP-STOP function
(
blast function. When this happens, you will hear a "CLICK". Then set a suitable
temperature with the temperature control
production is resumed.
SDB 2400 F4
Hold the iron vertically and press the steam blast button
). At low temperatures, the iron automatically switches off the steam-
must be turned to at least the setting range
to the "MIN" position.
.
.
. As soon as this is reached, steam
. You can also use the
.
.
at low
GB │ IE │
23
.
■