Replace The Filter And Wick; Understanding The Healthy Air Protect Lock; Replacing The Nano Protect Filter; Replacing The Nanocloud Rotary Humidification Wick - Philips 5000 Series User Manual

6 Replace the
filter and wick
Understanding the
healthy air protect lock
This appliance is equipped with the
healthy air protect lock to make sure
that the Nano protect filter and the
humidification wick are in optimal
condition when the appliance is
operating. When the Nano protect filter
and the humidification wick are almost
expired, the replacement light
to flash to indicate that they need to be
replaced.
If you do not replace the filter and
wick in time, the appliance will stop
operating and get locked.
Replacing the Nano
protect filter
Note
• The Nano protect filter is not
washable nor vacuum cleanable.
Filter alert light
status
Filter replacement
light starts
flashing (fig. ‡)
1
Remove the used Nano protect
filter from the appliance (fig. ˆ).
starts
Follow this
Replace the
Nano protect
filter
Note
• Do not touch the pleated filter
surface, or smell the filter as it has
collected pollutants from the air.
• Wash your hands after disposing of
the used filters.
2
Remove all packaging material of
the new Nano protect filter (fig. e).
3
Place the new Nano protect filter
into the appliance (fig. f).
4
Touch and hold the reset button
for 3 seconds to reset the
Nano protect filter lifetime counter
(fig. ƒ).
Replacing the
NanoCloud rotary
humidification wick
Filter alert light
status
Filter replacement
light starts
flashing (fig. ‡)
1
Take the wick wheel off the wick
support (fig. ~).
2
Unfasten the locks on the edge of
the wheel (fig. ‰).
3
Grip the snap-fit components
on the other side of the plate to
release the wick from the wheel
(fig. Š).
4
Take the used NanoCloud rotary
humidification wick out (fig. ‹) .
5
Remove all packaging material
of the new NanoCloud rotary
humidification wick (fig. Œ).
Follow this
Replace the
NanoCloud rotary
humidification
wick
EN
27