Replace The Activated Carbon Filter And The Hepa Filter - Philips AC4085 User Manual

10
To reattach the front panel, mount the
panel onto the top of the appliance first
(1). Then, gently place the panel against the
body of the appliance (2).
2
11
Reset the Multi-care filter lifetime (see the
chapter 'Reset the filter lifetime counter').
Replace the activated carbon
filter and the HEPA filter
Note
•
The activated carbon and the HEPA filters are
not washable nor vacuum cleanable.
Replace both the activated carbon filter and the
HEPA filter when the filter light
Tip
•
When you remove or insert filters, place the
appliance against a wall for more stability.
1
flashes.
Note
•
Insert the filters in the correct position.
•
Make sure that you place the filters in the order
of HEPA filter, activated carbon filter, Multi-care
filter (if available), and finally the pre-filter.
•
Make sure that the side with the tag is pointing
towards you.
1
Switch off the appliance and unplug it.
2
Place your fingers in the recesses of the
side panels.
3
Gently pull the bottom of the panel out
(1), then lift the top part of the front panel
towards you (2).
2
1
4
Remove all filters from the appliance.
EN 27