Decoding Capability - Huawei IRD6000 User Manual

IRD6000
User Guide
Item
IRD6000 settings (from
the web interface)
Verifying the Result
If a scrambled program that failed to be displayed can be displayed on the monitor properly,
the descrambling succeeds.

2.4.3 Decoding Capability

Prerequisites





Checking Configuration on the IRD6000 Side
Table 2-11 lists the configuration you need to check on the IRD6000 side.
Table 2-11 Configuration on the IRD6000 side
Item
IRD6000 settings (from the
front panel)
IRD6000 settings (from
the web interface)
Issue 02 (2012-12-05)
Signal sources are connected and signals are normal.
A CAM card and smart card available for scrambled satellite signals or code streams
A CAM card supporting the CAS that scrambles the test signals
An authorized smart card
A monitor to view decoded video
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Inspection Method
From the web interface, choose Main Board. From the
Operation drop-down list box, select CI Slot1 or CI
Slot2.
Inspection Method
 From the front panel, choose Outputs > Program
Setup. From the program list, select the program to
descramble. Select CI Slot1 or CI Slot2 based on the
CI card slot where the CAM resides.
 Choose Outputs > Decoder > Programm to select a
program to be decoded. Choose Output > Decoder >
Audio and Output > Decoder > Video respectively to
set the parameters of resolution, aspect ratio, and output
standard. The output settings must be consistent with
the reception settings on the monitor. Otherwise, video
output may be abnormal.
From the web interface, choose Audio/Video to set the
parameters of resolution, aspect ratio, and output standard.
The output settings must be consistent with the reception
settings on the monitor. Otherwise, video output may be
abnormal.
2 Operation Instructions
33