Service; Fascia Panel Removal (Touchtronic/Novotronic/Navitronic); Figure 100-1: Screws Securing The Fascia Panel (Touchtronic/Novotronic/Navitronic) - Miele G 1 Series Technical Information

Technical Information
4

Service

4.1

Fascia Panel Removal (Touchtronic/Novotronic/Navitronic)

1. Open the door.
2. Remove the retaining screws (Figure 100-1, Item 1).
3. Remove the fascia panel.
4. Pull off the switch buttons and selector knob (if applicable).
5. Disconnect the plug connection to the main electronic module.

Figure 100-1: Screws Securing the Fascia Panel (Touchtronic/Novotronic/Navitronic)

To re-install, first install the fascia panel and screw it into position, then
restore the switch buttons and knob.
222
G 1xxx/G 2xxx