Grid Status - Canon OMNERA 400A Operator's Manual

User Interface
Overhead Tube Crane

3.1.7 Grid Status

3.1.7.1 Grid Not Present
The user has defined in the Anatomic Protocol, that a grid shall be present for the selected
examination, but no grid is attached.
A warning will be displayed at the PC screen, see Fig. 3-8 Grid not present.
At the same time, a message is displayed at the Information field, saying Removed. This
message is always shown when the grid shall be present, according to the settings at the
Anatomic Protocol, but is absent. See Fig. 3-9 Grid removed.
3.1.7.2 Grid Present
The user has defined, in the Anatomic Protocol, that a grid shall not be used for the selected
examination, but a grid is attached.
A warning will be displayed at the PC screen, see Fig. 3-10 Grid present.
OMNERA®
Fig. 3-8 Grid not present.
Fig. 3-9 Grid removed.
Fig. 3-10 Grid present.
0073-095-418-EN Rev. 5.1
Page 42
Operator´s Manual
2020-09-25