Hitachi X200 Series Connection Manual page 21

4.2 Setup Items in Offline Mode
• Refer to the Maintenance/Troubleshooting Guide for information on how to enter offline
• The number of the setup items to be displayed for 1 page in the offline mode depends on the
Communication Settings
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings] in offline mode.
Touch the External Device you want to set from the displayed list.
Setup Items
SIO Type
Speed
Data Length
Parity
Stop Bit
Flow Control
GP-Pro EX Device/PLC Connection Manual
mode or about the operation.
Cf. Maintenance/Troubleshooting Guide "Offline Mode"
Display in use. Please refer to the Reference manual for details.
Select the SIO type to communicate with the External Device.
In the communication settings, set [SIO Type] correctly according to the serial interface
specifications of the Display.
If you select an SIO type that the serial interface does not support, proper operation cannot
be guaranteed.
Refer to your Display manual for details on the serial interface specifications.
Select the communication speed between the External Device and the Display.
Display data length.
Select how to check parity.
Select stop bit length.
Select the communication control method to prevent overflow of transmission and reception
data.
Setup Description
21
Inverter MODBUS RTU Driver