Hitachi X200 Series Connection Manual page 8

External Device Settings
For External Device communication settings, use the FUNC key, Up key, Down key, and STR key located in the
keypad of the External Device.
Refer to your External Device manual for details.
1
Set OPE/485 switch to "485" position.
2
Turn ON the External Device.
3
Press FUNC key.
4
Press and hold Down key to display [C---].
5
Press FUNC key.
6
Press Up key to display the setting function code.
7
Press FUNC key.
8
Press Up key or Down key to select the setting value.
9
Press STR key.
10
Reboot the External Device.
Setting Value
Function Code
C070
C071
C072
C074
C075
C076
C077
C078
A001
A002
GP-Pro EX Device/PLC Connection Manual
Setting Value
03 Selection of OPE/ModBus
06 Communication speed selection
1. Node allocation
00 Communication parity selection
1 Communication stop bit selection
02 Communication error select
0.00 Communication error time-out
0. Communication wait time
03 Frequency source setting
03 Run command source setting
8
Inverter MODBUS RTU Driver
Setup Description