Return Adapter 1 683 356 138 For Delphi Cris; Adapter Cable 1 684 465 804 For Denso Cris; Adapter Cable 1 684 465 805 For Denso Cris - Bosch 1687846016 Original Instructions Manual

en 16 | 1 687 846 016 | Product description
3.6.3 Return adapter 1 683 356 138 for Delphi CRIs
The return adapter 1 683 356 138
(Fig. 4, item 1) connects the return of the Delphi CRI
(Fig. 4, item 2) to the hose assembly for the return
quantity of CRI 846 / CRI 846H using the hose assembly
1 680 712 249.
!
Before using the return adapter, check the O-ring for
damage. Change the O-ring if defective or brittle.
Detached bits of the O-ring will damage the injector
or the quantity measurement system of EPS 708 /
EPS 815.
i
Secure the return adapter by pressing down the tab
(Fig. 4, item 3). To remove it, pull the tab up and re-
move the return adapter from the return connection.
i
The hose assembly 1 680 712 249 is included in the
accessory set 1 687 010 186.
i
The included cover caps can be used to keep the
return adapters dust-free during storage.
3
Fig. 4: Return adapter 1 683 356 138
1 Return adapter 1 683 356 138
2 Return connection of the injector
3 Tab
|
1 689 989 313 2016-08-15
3.6.4
The adapter cable 1 684 465 804 connects the electri-
cal connection of the Denso CRI to the connector X5 of
the CRI 800 actuation electronics.
Fig. 5:
3.6.5
The adapter cable 1 684 465 801 connects the electri-
cal connection of the Denso CRI to the connector X5 of
the CRI 800 actuation electronics.
1
2
Fig. 6:
Adapter cable 1 684 465 804 for Denso CRIs
1 684 465 804
FD...
Adapter cable 1 684 465 804
Adapter cable 1 684 465 805 for Denso CRIs
1 684 465 805
FD...
Adapter cable 1 684 465 805
A
B
C
D
E
F
458910-01_Pal
A
B
C
D
E
F
458910-02_Pal
Robert Bosch GmbH