Sealey VS911.V3 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1. GENERAL SAFETY
 WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment.
 Familiarise yourself with the application and limitations of the panel bag set, as well as the potential hazards.
 Maintain the set in good condition.
 Replace damaged parts.
Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
 Maintain correct balance and footing. Ensure floor is not slippery and wear non-slip shoes.
 Keep children and unauthorised persons away from the working area.
 DO NOT put hands/fingers in apertures created by bags without first inserting a mechanical chock to prevent accidental injury.
 DO NOT use the panel bags for purposes other than those for which they were designed.
 DO NOT over-inflate.
 DO NOT use on doors fitted with air bags.
 DO NOT use when you are tired, under the influence of alcohol, drugs or intoxicating medication.
 Deflate bag prior to storage.
 Clean, dry and store in supplied bag.
2. INTRODUCTION
Multi-purpose durable air cushion devices with rigid edges and fine air control valve. Suitable for positioning panels, bonnets and boots, prior
to fitment. 2mm bag thickness and semi-rigid construction allows bags to be slid between window frame and weather-stripping for improved
access for emergency vehicle opening tools. Soft air cushion is gentle on paintwork, frame, beadings and glass. Supplied in a vinyl pouch.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . VS911.V3
Load Capacity: . . . . . . . . . . . . . . . . . . . 100kg
Bag Dimensions (W x H): . . . . . . . . . . . Refer to fig.1
Bag 1: . . . . . . . . . . . . . . . . . . . . . . . . . . 40 x 182mm
Bag 2: . . . . . . . . . . . . . . . . . . . . . . . . . . 57 x 188mm
Bag 3: . . . . . . . . . . . . . . . . . . . . . . . . . . 160 x 160mm
© Jack Sealey Limited
INSTRUCTIONS FOR:
PANEL BAG SET 4PC
VS911.V3
MODEL NO:
Original Language Version
fig.1
VS911.V3 Issue: 1 - 13/06/14