Lenovo T1 User Manual page 12

Installation
Connect to the mobile client (skip the step if APP control isn't required)
1.Download APP
Search "Lenovo Cleaner T1" in App Store (Apple: search "Lenovo
Google Play) to download and install.
Lenovo Cleaner T1
3.Enter Network Distribution Status
Put the cleaner on the ground and press the "Charging button" and
"Partial cleaning button" for more than 3 seconds. It successfully
enters network distribution status if the orange indicator of flashes
slowly.
5.Add Device
Click "Add Device" in the main interface of "Lenovo Cleaner T1"APP
or "My Device Interface".
Android phone:
a. Input WiFi name and password, then, click "the Next Step";
b. Select the hotspot of cleaner, then, click "the Next Step";
c. The cleaner start to distribute network after successful
automatic connection. If it fails to automatically connect to the
hotspot of cleaner please try it again according to the prompt
message.
2.Register
Open "Lenovo Cleaner T1"APP to register or login account.
4.WiFi Network Configuration
Make sure that your mobile phone has been connected to
WiFi (only support 2.4GHz band. It can't be connected to
WiFi which has no password. Please set password prior to
your connection. In addition, WiFi name and password
should exclude English double quotes).
Apple iphone:
a. Connect to home WiFi, input WiFi name and password,
then, click "the Next Step";
b. Switch to the WiFi setting interface of your phone to
select the corresponding hotspot of cleaner;
c. Return to APP and click to connect to cleaner. Then,
the cleaner starts to distribute network;
Use APP to control and use the cleaner if it is connected
to WiFi successfully.
10