Defrost Function; Cleaning, Maintenance And Storage; Troubleshooting - Silvercrest SMW 700 D1 Operation And Safety Notes

Set the desired time on the cooking time knob
When doing so, refer to the weight of the food
or the manufacturer's instructions.
The product begins to heat up the food automat-
ically after the cooking time is set.
After the set cooking time has expired, the cook-
ing process ends automatically and a beep tone
sounds.
If you want to end the cooking process early,
manually turn the cooking time knob
which will trigger the beep tone.
Open the door
8
handle .
9
Always set the cooking time knob
when the product is not in use.

Defrost function

In the following list you can find the approximate
defrosting time needed for different weights. Use the
cooking level "Medium-low (defrost)"
the defrosting time as necessary if the desired weight
is not yet defrosted.
Weight
200 g
400 g
600 g
800 g
1000 g

Troubleshooting

Problem
The product won't start.
24 GB/IE
to "0",
2
by pulling on the door
to "0"
2
. Extend
Time
approx. 5 minutes
30 seconds
approx. 10 minutes
30 seconds
approx. 15 minutes
30 seconds
approx. 20 minutes
30 seconds
approx. 25 minutes
30 seconds
Cause
The mains plug is not firmly plugged in. Unplug the mains plug and plug
The fuse has burnt through or the
switch-disconnector has triggered.
. To defrost 500 g of minced meat, use the following
2
settings:
Select the cooking level "Medium-low
(defrost)"
Set the cooking time knob to 11 minutes.
For even defrosting, open the door
7 minutes and turn the minced meat over.
Close the door
process.
At the end of the defrosting process, leave the
minced meat to stand for a further 5 minutes.
Cleaning, maintenance
and storage
I f the product is not kept clean, this can lead to
wear and tear which compromises the service life
of the product and leads to dangerous situations.
C lean the door
anism regularly.
10
T he product must not be cleaned using a steam
cleaner.
R emove any food residues regularly.
D o not use harsh cleaning agents or scouring
agents.
U nplug the mains plug from the mains socket if
you are not using the product for a long period
of time.
Make sure that all parts are completely dry
before you use the product.
Clean the product using a soft sponge and
some soapy water.
The glass plate
safe.
.
8
and continue the defrosting
8
and the door locking mech-
8
is dishwasher-
7
Solution
it back in after 10 seconds.
Contact the service centre.
after