Sony UP-DF550 Manual page 23

stopper prohibits you from inserting the tray all
the way in.
If the cover of the film tray comes off
Remove the film tray and re-attach the cover.
When you use UPT-510BL film sheets
Insert the film sheets securely as the printing surface
protection sheet passes over the stopper located in the
film tray.
Stopper
When placing the unit vertically
Pay attentions to the following points when you load
film sheets with the unit placed vertically.
• Do not give a shock to the film tray. Doing so may
cause the film sheets to move inside the film tray. This
may result in the film jamming.
• When removing or inserting the film tray, hold it while
pushing the cover down with both hands. If you hit the
film tray, the cover of the film tray will open and the
sheets of film may pop out from the film tray.
• If you slant the film tray, film sheets may move to the
outlet of the film tray. This may cause film jamming.
In such a case, put the film sheets back inside the film
tray by pushing them with your finger, as shown
below.
Notes on storing film sheets
• If you remove the film sheets and plan to keep them
for a long time, store unused film in the damp-proof
bag.
• Store unopened packages in a cool, dark place.
23
Loading Film Sheets