Sony UP-DF550 Manual page 55

To move to the next window
Move the cursor to the right-most digit, and then
press the g button.
Move the blinking cursor to the most right-most
digit.
v
SUBNETMASK setting window
The cursor blinks here.
6
Set the sub-net mask.
1 Follow step 5 to set the sub-net mask.
2 Move the cursor to the right-most digit by
pressing the g button.
Move the blinking cursor to the right-most
digit.
3 Press the g button again.
The DEFAULT GATEWAY setting window
appears.
The cursor blinks here.
g
Press the button
To return to the previous window
Move the cursor to the left-most digit, and then
press the G button.
Move the blinking cursor to the left-most digit.
v
Previous IP ADDRESS setting window
7
Set the default gateway.
1 Follow step 5 to set the default gateway.
2 Move the cursor to the right-most digit by
pressing the g button.
3 Press the g button again.
The SAVE SETTINGS window appears.
8
Press the EXEC button.
The IP address, sub-net mask, and default gateway
set in steps 5, 6, and 7 are executed.
Note
It takes several minutes for the IP address, sub-net
mask, and default gateway to become effective. The
unit does not work during this period. Even if you
try to operate the unit, the unit does not react. Wait
until the size and remaining amount of each film
type are displayed.
To quit the setting midway
Press the MENU button to remove the menu before
pressing the EXEC button. The settings performed
become invalid and the printer returns to the standby
status. The type and remaining amount of each film type
are displayed on the LCD.
G
Press the button
The cursor blinks here.
Setup of the Unit
55