Table of Contents
Advertisement
3
Press [Pair] to set pair mode or single mode.
Pair mode is selected when [Pair] is lit, and single
mode is selected when it is not lit.
For details, see "Pair mode and single mode"
(page 159).
4
Press an FM output button to select the target FM
output (FM1 or FM2).
In pair mode, the selected FM output becomes the
reference, and both FM1 and FM2 are selected.
Loading Image Data
Image data files saved in storage need to be loaded in
memory in order to use them on an FM output.
Note
Loading image data is supported only when the switcher
signal format matches the file signal format.
Loading a folder/file into memory
1
Open the Frame Memory >File >Load menu (2121).
Icons for folders/files that exist in storage and memory
are displayed.
An orange frame is displayed on the icons of files
currently loaded in memory.
Note
Files that exist only in memory are not displayed.
2
Select the folder/file to load into memory.
For details about the method of operation, see "Folder
and file selection operations" (page 162).
3
Press [Load to Memory].
To delete a folder/file from memory
Select the folder/file, and press [Unload].
Folder and file selection operations
Press the icons for folders and files to select them in the
folder/file selection area.
You can also enter the name of a folder/file to search for.
To switch folders
Press [Select], turning it off.
Press the folder hierarchy level selection button or folder
icon to switch the folder for display.
To select a folder/file
Press [Select], turning it on.
Press the icon for a folder/file to select it. When selected,
a check mark is displayed on the icon. Pressing an icon
displaying a check mark will deselect it.
The last used icon is displayed with a light-blue frame, and
the name, duration, and creation date are displayed in the
status area at the top of the screen.
You can select all files/folders in the displayed folder by
pressing [ALL].
Note
Pressing [Select], turning it off, will deselect all files/
folders.
To search by folder/file name
1
Press [Find].
2
Press [Find] in the pop-up window.
3
Enter the string you want to search for in the keyboard
window, and press [Enter].
This starts the search, and the indicator is lit.
When the search ends, the matching folders/files are
displayed selected.
To scroll through the selected folders/files, press [<
Prev] or [Next >].
To close the pop-up window, press outside the pop-up
window on the menu screen.
Note
The selected folder and the folders/files within the
hierarchy of that folder are the search target.
162
Advertisement
Table of Contents
