Installing The Bench Cushion; Lubrication; Greasing The Machine - Toro Workman GTX Series Operator's Manual

Installing the Bench
Cushion
Slide the bench cushion onto the pins and lower the
cushion (Figure 25).
Figure 25

Lubrication

Greasing the Machine

Service Interval: Every 100 hours/Yearly (whichever
Grease Type: No. 2 lithium grease
1. Use a rag to wipe the grease fitting clean so that
foreign matter cannot be forced into the bearing
or bushing.
2. With a grease gun, apply 1 or 2 pumps of grease
into the grease fittings on the machine.
3. Wipe the excess grease off the machine.
The grease fittings are located at the inner end of the
control arms, the tie-rod ball joint, and the outer end
of the control arms
g237190
30
comes first)—Grease the bearings
and bushings. Grease the machine
more frequently when using it for
heavy-duty operations.
(Figure 26 and Figure
Figure 26
Figure 27
27).
g034057
g034058