Beko ARI 7757186301 Service Manual page 12

1. Prepare the surface of the bench as shown in the figure.
2. The sealing gasket is given with the product, paste it between built in hob and bench as
shown in the figure.
3. Center the product in the bench.
4. While fixing the built in hob, connect the bottom of the plate mounting holes in the
housing.
5. Center the product in the bench.
6. While fixing the built in hob, connect the bottom of the plate mounting holes in the
housing.
1. Built in hob
2. Mounting clamp
3. Bench
» Back wiev (connection holes)
TR | 12