Installation Environment Requirements - Huawei LUNA2000 User Manual

LUNA2000-(5-30)-S0
User Manual
Cabling Requirements
●
●
●

1.4 Installation Environment Requirements

●
●
●
●
●
●
●
●
●
●
●
Issue 01 (2020-10-20)
When routing cables, ensure that a distance of at least 30 mm exists between
the cables and heat-generating components or areas. This prevents damage
to the insulation layer of the cables.
Bind cables of the same type together. When routing cables of different types,
ensure that they are at least 30 mm away from each other.
Ensure that the cables used in a grid-tied PV power system are properly
connected and insulated and meet specifications.
Install the battery in a dry and well-ventilated environment to ensure good
heat dissipation.
You are advised to install the battery in a sheltered place or install an awning
over it.
Install the battery in a clean environment that is free from sources of strong
infrared radiation, organic solvents, and corrosive gases. Avoid exposing the
battery to direct sunlight or water.
The installation position must be far away from fire sources.
Children are not allowed to enter the installation position.
The installation position must be far away from water sources such as taps,
sewer pipes, and sprinklers to prevent water seepage.
The battery must be placed on a solid and flat supporting surface.
Do not place any flammable or explosive materials around the battery.
To prevent fire due to high temperature, ensure that the ventilation vents or
heat dissipation system are not blocked when the battery is running.
Do not expose the battery to flammable or explosive gas or smoke. Do not
perform any operation on the battery in such environments.
The battery system site must be equipped with qualified fire extinguishing
facilities, such as fire extinguishing sands and powder fire extinguishers.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
5