Huawei LUNA2000 User Manual page 47

LUNA2000-(5-30)-S0
User Manual
Figure 4-3 M6 expansion bolt structure diagram
(1) Bolt
(4) Flat washer
● To prevent dust inhalation or contact with eyes, wear safety goggles and an
● Wipe away any dust in or around the holes and measure the hole distances. If
● Level the head of the expansion sleeve with the concrete wall or floor after
● Loosen the nut, spring washer, and flat washer of the expansion bolt at the
Issue 01 (2020-10-20)
NO TICE
anti-dust mask when drilling holes.
the holes are inaccurately positioned, drill holes again.
removing the nut, spring washer, and flat washer. Otherwise, the mounting kit
will not be securely installed on the wall or ground.
bottom.
Copyright © Huawei Technologies Co., Ltd.
(2) Nut
(5) Expansion sleeve
4 System Installation
(3) Spring washer
41