Streaming; [Streaming] Tab - Sony REA-C1000 Operating Instructions Manual

To enable Referer check
Select [Enable] in [Referer Check]. The following items
can be configured when Referer check is enabled.
[No. 1] to [No. 10]: Register hosts that are not subjected
to the Referer check as an exception list.
[Host Name]: Enter the host name or IP address of the
computer that hosts the web page you want to
register in the exception list.
[Port No.]: Enter the port number of the computer that
hosts the web page you want to register in the
exception list.
[Reset]: Reset the exceptions settings.

Streaming

Use to configure streaming.
The screen consists of [Streaming] and [Codec] tabs.
Note
Streaming using the RTMP protocol and RTSP protocol
employed by the unit is susceptible to the possibility that
streaming data can be accessed by a third party during
streaming. To ensure the confidentiality of the streamed
data, it is recommended that you connect the unit and
streaming data receiver within a closed network or
consult an organization with specialized knowledge.

[Streaming] tab

The unit supports streaming using the RTMP/RTMPS
protocol and RTSP protocol. Use the [Streaming] tab to
select the protocol and configure settings related to
streaming.
To enable streaming
Select the protocol to use in [Streaming Service].
When [RTMP] is selected, you can start and stop
streaming from the run screen of the application.
When [RTSP Server] is selected, launching the
application enables the streaming function.
[RTMP]: Select the RTMP/RTMPS protocol.
[RTSP Server]: Select the RTSP protocol.
[Off]: Disable the streaming function.
21