Sony REA-C1000 Operating Instructions Manual page 37

5
Configure the following settings.
Tracking object size
Select the size of the object to keep within the image
during tracking.
This can be configured when the tracking mode is
set to [Free Object Pan Tracking]. It is not displayed
when the tracking mode is set to [Fixed Frame Pan
Tracking].
[Full Body]: Keep the full body of the person to be
tracked within the image.
[Upper Body]: Keep the upper half of the person to
be tracked within the image.
Camera position
Set the distance from the remote camera to the
blackboard or screen, the height from the person's
feet, and the offset.
[Depth]: Specify the horizontal distance from the
remote camera to the blackboard or screen (refer
to "Depth" dimension in the following diagram).
[Height]: Specify the vertical distance from the feet
of the person to be tracked to the remote camera
(refer to "Height" dimension in the following
diagram).
[Offset]: Specify the horizontal offset distance
when the remote camera forward direction (0°
pan angle direction) is at an angle to the
perpendicular line from the blackboard or screen
(refer to "Offset" dimension in the following
diagram).
Tips
• The person to be tracked is assumed to move
across the front of the blackboard or screen.
• Select the units for Depth, Height, and Offset
when entering values.
• The horizontal offset distance is 0 when the
remote camera forward direction (0° pan angle
direction) is parallel to the perpendicular line
from the blackboard or screen (directly opposite).
• When the tracking mode is set to [Free Object
Pan Tracking], the unit automatically controls the
zoom position of the remote camera and
determines the field of view in the zoom
direction.
6
When finished, click the [Next] button.
7
Configure the following settings.
Home position
Operate the remote camera using the PTZ controls
to move to the camera position (home position)
where detection of a person will start. Tracking
operation starts from the home position.
Face Height Position
Displays the set value of the height of the face of the
person to be tracked set by the framing adjustment.
You can adjust the framing while the application is
running (page 40).
Body Size
Displays the set value of the size of the person to be
tracked set by the framing adjustment. You can
adjust the framing while the application is running
(page 40).
Note
When the tracking mode is set to [Fixed Frame Pan
Tracking], the recovery position (page 39) cannot
be set, so set the home position while taking the area
of the board to keep within the image during
tracking into consideration. Also, set the home
position while taking the detection area within the
home position, set in step 9, into consideration.
8
When finished, click the [Next] button.
37