Commissioning - Siemens SIMOCODE pro V Manual

3 Engineering
8. Follow the notes and instructions on the screen during the download process.
9. A successful download will appear as follows.
Note The download process will be aborted with an error if the SIMOCODE device is
in the "Remote/Automatic" operating mode, if an "ON" command is pending, or if
the motor is running.
3.2.4

Commissioning

A specific commissioning sequence is not required. If you have carried out the
hardware and software installation described above, you only have to connect the
power circuit with the 3-phase mains or switch on the SIRIUS circuit breaker.
For information on operating the application example, refer to chapter 3.4.
Blocking Protection for Pumps with SIMOCODE pro V
Article ID: 109478058, V2.0, 09/2020
27