Parameter Assignment For The Simocode Pro V Pn - Siemens SIMOCODE pro V Manual

3 Engineering
3.3.2

Parameter assignment for the SIMOCODE pro V PN

PROFINET parameters
1. Double-click the "Parameters" command in the project tree.
2. Go to "PROFINET parameters" and enter the following parameters.
–
IP parameters
–
Select Basic type 3 so that you can transmit all of the send data described
in
Blocking Protection for Pumps with SIMOCODE pro V
Article ID: 109478058, V2.0,
2.2.11 to the controller.
09/2020
31