Advertisement
Quick Links
Operating Instructions
Replacement Filter Unit Commercial Use
ET-RFF200
Model No.
Main filter unit
Pre-filter
ENGLISH
Thank you for purchasing this Panasonic product.
■ Please read these operating instructions and the projector operating
instructions carefully, and then use this product correctly.
■ Please save this Operating Instructions for future use.
DPQX1007ZA/X1
Advertisement
Related Manuals for Panasonic ET-RFF200
Summary of Contents for Panasonic ET-RFF200
- Page 1 Replacement Filter Unit Commercial Use ET-RFF200 Model No. Main filter unit Pre-filter ENGLISH Thank you for purchasing this Panasonic product. ■ Please read these operating instructions and the projector operating instructions carefully, and then use this product correctly. ■ Please save this Operating Instructions for future use. DPQX1007ZA/X1...
- Page 2 Replacing the air filter unit Before replacing the air filter unit This product consists of two types of the air filters (each one piece). - Main filter unit - Pre-filter Attention Turn off the power and disconnect the power plug from the wall outlet before you replace the air filter unit. When replacing the air filter unit, make sure that the projector is stable, and work in an environment that is safe, even if you drop the air filter cover, the main filter unit or the pre-filter. Do not put anything into the air vents. Doing so may result in malfunction of the projector. Note Illustrations contained in this manual that show the projector may differ from the actual objects they depict.
- Page 3 Replacing the air filter unit (continued) Claws Pre-filter Air filter cover Groove to put the finger in Fig. 3 5) Attach the unused main filter unit to the projector. Perform Step 3) in the reverse order. Push in the main filter unit securely until it clicks into place. 6) Attach the unused pre-filter to the air filter cover. There is no specification of the front and back for attaching the pre-filter.
- Page 4 Replacing the air filter unit (continued) Attention Make sure that the main filter unit and the pre-filter are properly attached before using the projector. If they are not attached, the projector will suck in dirt and dust causing a malfunction. Dispose of the packaging materials properly after unpacking the product. Do not disassemble the main filter unit. Note If you use the projector without attaching the main filter unit, the filter indicator blinks in red and the message appears on the projected image for about 30 seconds. Turn the projector off, and then attach the main filter unit before turning the projector on again. The replacement cycle of the air filter units varies greatly depending on the usage environment. For procedures on maintaining the air filter unit, refer to the operating instructions supplied with the projector. Disposal When discarding this product, please contact your local authorities or dealer and ask for the correct method of disposal. Panasonic Corporation Web Site : http://panasonic.net/avc/projector/ © Panasonic Corporation 2016 W0316GC0 -ST...