Table of Contents
Advertisement
2
Dig pos feedback
1
Alarm S1 and S2
Select the alarm and switching outputs for the module for "digital position feed-
back":
AlarmOn=active low OFF = alarm output HIGH active
S_1ON=active low
S_2ON=active low
S1ON=act below
S2ON=act below
3
Options installed
Shows the connected option modules:
- Display
- Analog Pos. Feedback
- Dig. Pos. Feedback
- FSK Modem
- Pressure sensor
- Valve analysis
7
"Diagnostics" menu
1
Reset counter
Press
to toggle the reset option for the stroke counter and/or travel counter between
F2
ON (reset) and OFF (do not reset).
12
ON = alarm output LOW active
OFF = switching point 1 HIGH active
ON = switching point 1 LOW active
OFF = switching point 2 HIGH active
ON = switching point 2 LOW active
Off =switching output 1 active when exceeded
ON =switching output 1 active when below
Off =switching output 2 active when exceeded
ON =switching output 2 active when below
"Diagnostics" menu
"Diagnostics" menu
42/18-75 EN
Advertisement
Table of Contents
