Simulation" Menu; "Information" Menu - ABB HART HHT 275 Manual

8

"Simulation" menu

1 Simulation
Switches the simulation in the TZID-C/TZID-C200 on ("active") or off ("inactive").
Two minutes after the last user actions the TZID-C/TZID-C200 positioner returns
to the local mode. Note that the values are not polled automatically. Switch the
communicator off and on again to update the display.
2 Operating mode
Display the current operating mode.
3 Options installed
Display the currently connected optional modules.
4 Position
Simulate analog position feedback.
When simulation is disabled, a corresponding error message is displayed.
5 Failure
Simulate alarm outputs and switching points. Press
tive function.
9

"Information" menu

1 Device Tag
1 Message
Enter the device tag.
2 Tag
Enter the address on the bus.
3 Description
Enter the plant description.
4 Measuring task
Enter the measuring task.
5 Date
Enter the date (format MMDDYY).
2 HART
1 Universal rev
Display the HART universal revision.
2 Fld dev rev
Display the field device revision.
3 Num req preams
Display the preambles used.
4 Poll addr
Display the polling address.
42/18-75 EN "Simulation" menu
"Simulation" menu
to activate/deactivate the respec-
F2
13