To Assemble The Product - Husqvarna DM 200 Workshop Manual

7. Tap the rotor shaft carefully with a soft head mallet
to loosen it.
CAUTION: Make sure that the metal surface
does not become damaged.
8. Remove the rotor from the middle cover.

6.3 To assemble the product

To assemble the rotor on page 26 to assemble
Refer to
the rotor.
Refer to To assemble the stator on page 28 to
assemble the stator.
12 - Repair and servicing
To replace the gear oil on page 14 to replace
Refer to
the gear oil.
1. Put the middle cover with the rotor on the gear
housing.
1332 - 001 - 04.03.2021