Site Preparation Requirements For The Processing Station; Physical Space Requirements - HP Jet Fusion 4200 Product Documentation Site Preparation Manual

3 Site preparation requirements for the
processing station
NOTE: If you have the HP Jet Fusion 5200 3D Processing Station, refer to the HP Jet Fusion 5200 Series 3D
Printing Solution Site Preparation Guide.

Physical space requirements

Unloading route
The route between the unloading area of the processing station and the installation site, including any corridors
and doorways through which the station must be transported, is important to proper site preparation and must
be planned before the arrival of the station. This pathway must be clear when the station arrives.
CAUTION: For the 4210, check the measurements of the material supply that you are going to use, and bear in
mind where you are going to use it.
Processing station physical specifications with packaging
Width with packaging
Depth with packaging
Height with packaging
Weight with packaging
For the specifications without packaging, see
production area on page
Doorway specifications
Minimum doorway width
Minimum doorway height
Minimum corridor width with right-angled bend
ENWW
2384 mm (93.86 in)
1176 mm (46.30 in)
2181 mm (85.87 in)
550 kg (1213 lb)
Load bearing on page 24
26.
1196 mm (47.09 in) with packaging
940 mm (37.01 in) before assembling the material cartridge support
800 mm (31.50 in) without packaging and after disassembling some parts
2201 mm (86.65 in) with packaging
2000 mm (78.74 in) as removed from the packaging before starting installation
2400 mm (94.49 in) without packaging and mixer upwards
1750 mm (68.90 in) with packaging
and Designing the optimal print-
Physical space requirements 23