Contents Getting started Buttons and gestures Pairing your watch with your phone Powering on/off and restarting the watch Charging my watch Workout monitoring Starting a workout Using Smart companion Viewing workout records Workout status Tracking daily activities Automatic workout detection Route back Health management Heart health research...
Page 2
Contents Remote shutter Connecting earbuds Do Not Disturb mode Using voice assistant More guidance Wearing the watch Adjusting and Replacing the watch strap Setting Gallery watch faces Animated watch faces Standby watch face OneHop Installing, replacing, and deleting watch faces Setting favorite contacts Setting the time zone and language Adjusting the ringtone...
If you are using a HUAWEI WATCH GT 2, HUAWEI WATCH GT 2e, or HUAWEI WATCH GT 2 Pro, you can only press the Up button to lock or unlock screen, and press the Down button to switch screens during workouts. The watch screen is locked by default during swim workouts and cannot be unlocked.
Page 4
Press and hold Wake up the voice assistant. Currently, this feature is only available with the Down button the HUAWEI WATCH GT 2 (46 mm), HUAWEI WATCH GT 2e, and HUAWEI WATCH GT 2 Pro. Swipe up or Switch screen.
Getting started You can enable the Raise wrist to wake screen function in the Huawei Health app by going to the details screen of your watch. Turn off the screen Lower or rotate your wrist outwards. • The screen will turn off automatically 5 seconds after the watch's screen is turned on if no •...
Download and install the Huawei Health app from App Store. If you have already installed it, make sure that it is up-to-date. Open the Huawei Health app, go to Devices > + > Smart Watch, and touch the device you wish to pair.
Getting started Powering off the watch When the watch is powered on, press and hold the Up button, and then touch Power off. • When the watch is powered on, press the Up button while on the home screen, swipe up or •...
Page 8
Only the HUAWEI WATCH GT 2 Pro and PORSCHE DESIGN HUAWEI WATCH GT 2 • support reverse charging from phones. The phone models that support this feature are...
Page 9
Getting started Method 3: Check the battery level on the device details screen in the Huawei Health app. If the remaining battery level is 10%, a charging reminder will be displayed. Charge your watch in a timely manner and avoid using it when the battery level is low.
Workout monitoring Starting a workout Starting a workout using your watch: Enter the app list of your watch and touch Workout. Swipe up or down and select the workout you want to do or your preferred running course. Alternatively, swipe up on the screen and touch Custom to add other workout modes.
Starting a workout using the Huawei Health app: To start a workout using the Huawei Health app, move your phone and watch close to each other to ensure that they are connected properly.
Smart companion is currently only available for Outdoor Run . If you have set your workout goal, your smart companion will not provide you with any voice guidance. To ensure that your workout companion can work properly, wear a Huawei or Honor smart watch or smart band.
Method 2: Viewing activity records using the Huawei Health app Open the Huawei Health app and view activity records on the home screen. To view your activity records using the Huawei Health app, ensure that the watch is • connected to your phone.
Workout monitoring After you have enabled Auto-detect workouts under Settings > Workout settings, the wearable will remind you to start the workout if it detects that there is a change in your activity intensity and suggests a workout mode for you. You can select to ignore or start recording the workout session.
Health management This feature is only supported after connecting a HUAWEI WATCH GT 2 Pro ECG to an • Android phone. To enable this feature, make sure that the Huawei Health app has been updated to the • latest version. Open the Huawei Health app, touch the Heart card on the Health screen, and enable ECG.
Page 16
• health. If you need to see a doctor, touch Reserve appointment in the app. • HUAWEI WATCH GT 2 Pro ECG: • Users who are under 18, or pregnant, or with a pacemaker, or have been • diagnosed with severe arterial stenosis, arrhythmia, or hypertension are not advised to use this feature.
Vascular Health Research app from Huawei AppGallery. Currently, this feature is only available on the HUAWEI WATCH GT 2 Pro (ECG) when • paired with Huawei phones running Android 5.0 or later.
1) Steps: This ring indicates the proportion of your steps to the target step count. The default goal is 10,000 steps. You can change the goal settings in Huawei Health depending on your preferences. 2)...
Wear your watch correctly and keep your arm still. From the home screen, press the Up button, swipe on the screen, and touch SpO2. HUAWEI WATCH GT 2 Pro, HUAWEI WATCH GT 2 Pro ECG, and HUAWEI WATCH GT 2 PORSCHE DESIGN: Touch Measure.
Monitoring your heart rate The watch features an optical heart rate sensor, which can monitor and record your heart rate all day. To use this feature, you need to enable Continuous heart rate in the Huawei Health app. When the watch detects that the user has fallen sleep, it will switch to use the non-visible light to measure your heart rate, letting you have a good nights sleep.
Page 21
Huawei Health app. Continuous heart rate monitoring To enable this feature, connect your watch to your phone using the Huawei Health app and enable Continuous heart rate monitoring in the Huawei Health app. Once this feature is enabled, your watch can measure your real-time heart rate.
Page 22
Open the Huawei Health app, go to Me > Settings > Heart rate limit and zones and select your desired heart rate limit. The following figure shows how to set your heart rate limit:...
Heart rate alerts To enable High heart rate alerts for your resting heart rate, open the Huawei Health app, touch Devices then your device, go to Continuous heart rate monitoring > High heart rate alert, and set your heart rate upper limit. Then, touch OK. When you are not doing any exercise, you will receive an alert when your resting heart rate stays above your set limit for more than 10 minutes.
(1 hour by default). Your band will vibrate and the screen will turn on to remind you to take a moment to get up and move around. To disable Activity reminder, open Huawei Health, touch Devices then your device name, touch Health monitoring and disable Activity reminder.
Page 25
HONOR Band 6: This feature is only available in some countries and regions. For • more information, contact the official Huawei service hotline. Touch Records to view and modify period data. The predicted period is marked in •...
Convenient life Apps This feature is only supported with the HUAWEI WATCH GT 2 Pro Series and. This feature is only available with phones that run Android 6.0 or later. Installing apps Open the Huawei Health app and touch Apps on the device details screen.
Go to Updates > Update to update apps to the latest version for a better experience. Uninstalling apps Open the Huawei Health app and touch Apps on the device details screen. Touch Manager to view the apps to be updated and the list of installed apps.
Convenient life When your watch is in Do Not Disturb or Sleep mode, not being worn, or during • workouts, it will still receive notifications but will not alert you. You can swipe up on your watch screen to view these messages. After you have disabled the feature to display detailed notification content, the sender •...
Convenient life From the home screen press the Up button, swipe until you find Music, and then touch it. Choose music that you have added in the Huawei Health app and then touch the play icon to play the music.
Method 2: Set a smart or event alarm using the Huawei Health app. Smart alarm: Open the Huawei Health app, touch Devices then your device name, and go to Alarm > SMART ALARM. Set the alarm time, smart wakeup time, and repeat cycle.
Convenient life Event alarms set on your watch and the Huawei Health app are synchronized. You can • set a maximum of five event alarms. By default, there is only one smart alarm. You cannot delete the smart alarm or add smart alarms.
Convenient life Air pressure: Air pressure measurement range: 300 to 1100 hPa. Swipe up or down to check altitude and air pressure respectively. Swipe on the screen to view the air pressure and altitude value. • On the Altitude screen, touch Calibrate and adjust it to the current altitude manually. •...
Convenient life To check the weather information on your watch, you are advised to open the Huawei • Health app, touch Devices, touch your device name, and then enable Weather reports. You can set the Temperature unit to Celsius °C or Fahrenheit °F.
To enable the voice assistant feature on the watch, connect your watch to the phone using the Huawei Health app, then press and hold the Down button on the watch. Input your voice commands to your watch, such as for making calls, checking life services, and controlling HiLink-enabled devices.
More guidance Wearing the watch Attach the heart rate monitoring area of your watch on the top of your wrist. To ensure the accuracy of heart rate measurement, wear your watch properly and do not wear it above the joint in your wrist. Do not wear it too loosely or too tightly but make sure that your watch is attached securely on your wrist.
Page 37
More guidance 3. Re-assemble the strap. 4. Put the screws back in. Adjusting metal mesh straps 1. Undo the clasp. 2. Pull the bottom plate upward so it is at a 90° angle with the strap.
Page 38
More guidance 3. Slide the clasp to adjust the length. 4. Align the plate with the grooves and clamp it back down. Finish by fastening the clasp. Removing and installing the strap To remove a non-metallic strap, unlock the fastener, remove your current strap, and then release the spring pin, as shown in the following figure.
You may not be able to set Gallery Watch faces in certain countries and regions. • Open the Huawei Health app, touch Devices, go to Watch faces > More > Mine, and touch Gallery. Touch + and choose to either upload an image from your phone's Gallery or take a new photo.
HUAWEI WATCH GT 2 Pro. Connect your watch to the phone using the Huawei Health app, press the Up button on your watch to enter the app list, go to Settings > OneHop and touch Enable. The watch...
Download and install even more cool watch faces by performing the following: Open the Huawei Health app and touch your watch name. Go to Watch faces > More and see all the watch faces that are supported on your watch.
More guidance Setting favorite contacts Open the Huawei Health app and touch Devices. Touch your device name to access the watch settings screen. Touch Favorite contacts. Then perform the following: Touch ADD and your phone contacts list will appear. Then select the contacts you wish •...
More guidance Adjusting the ringtone This feature is only available on the HUAWEI WATCH GT 2 (46 mm) version 1.0.2.28 or • later and the HUAWEI WATCH GT 2 Pro. To use this feature, update the Huawei Health app to version 10.0.0.651 or later.
Firmware update. Touch in the upper right corner and enable Auto-update device over Wi-Fi. For iOS users: Open the Huawei Health app, go to Me > Settings, and enable Auto- • download update packages over Wi-Fi. Once Auto-update device over Wi-Fi or Auto-download update packages over Wi- •...
Page 45
Method 2: Open the Huawei Health app, touch Devices, touch the device name, and then touch Restore factory settings. When you are pairing you watch with the phone for the first time or you are on the System screen under Settings, follow the onscreen instructions to restore the watch to its factory settings.