Service Repair, Maintenance And Spare Parts - Bosch rexroth MSK Series Operating Instructions Manual

40/57
Maintenance and repair
8.2

Service repair, maintenance and spare parts

Preparing information
Bosch Rexroth AG R911325169_Edition 03
Wearing parts are reliably and professionally repaired and replaced by the
Bosch Rexroth Service in shopfloor-oriented quality.
The service lives of motor components, such as seals and bearings, may
vary depending on the operating conditions, such as operation mode, speed,
vibration and shock load, and frequent reverse mode.
We recommend to change the bearing after 30,000 operating hours. Shorter
replacement intervals may be necessary; cf. checks during operation
7.3 "Operation" on page 38.
We recommend regular visual inspections on shaft sealing rings. Depending
on operating conditions, signs of wear may appear after 5,000 operating
hours. If necessary, replace the shaft sealing rings.
We recommend to have these repairs made by Bosch Rexroth
Service.
The Bosch Rexroth service helpdesk at our headquarters in Lohr, Germany
and our worldwide service provide You can contact us 24/7.
Phone: -49 (0) 9352 40 50 60
Fax -49 (0) 9352 18 49 41
Email: service.svc@boschrexroth.de
Internet: http://www.boschrexroth.com
For quick and efficient help, please have the following information ready:
● Detailed description of the fault and the circumstances
● Information on the rating plate of the products in question, particularly
type codes and serial numbers
● Your contact data (phone number, fax number, e-mail address)
MSK Synchronous Servomotors
chapter